Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: Sequoia Doc ID: RM000003092002X
Title: LIGHTING (EXT): TURN SIGNAL FLASHER ASSEMBLY: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH

HINT:

Use the same procedure as for the RH side INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+ .

2. REMOVE COWL SIDE TRIM BOARD LH

HINT:

Use the same procedure as for the RH side INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+ .

3. REMOVE INSTRUMENT SIDE PANEL LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

5. REMOVE TURN SIGNAL FLASHER ASSEMBLY

(a) Disconnect the connector.

(b) Remove the nut and turn signal flasher.